Backup Error on New Install

michaelc

On a (relatively) new install of postgres/bacula/bacularis on Debian Trixie, trying to back up the Catalog and have been getting this error/problem:

09-Feb 23:10 bacula-dir JobId 190: shell command: run BeforeJob "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog"
09-Feb 23:10 bacula-dir JobId 190: Start Backup JobId 190, Job=BackupCatalog.2026-02-09_23.10.00_23
09-Feb 23:10 bacula-dir JobId 190: Connected to Storage "File1" at localhost:9103 with TLS
09-Feb 23:10 bacula-dir JobId 190: Storage daemon "File1" didn't accept Device "FileChgr1" because: 3924 Device "FileChgr1" not in SD Device resources or no matching Media Type or is disabled.
09-Feb 23:10 bacula-dir JobId 190: Fatal error: Failed to start job on the storage: File1
09-Feb 23:10 bacula-dir JobId 190: Error: Bacula bacula-dir 15.0.3 (25Mar25):
Build OS: x86_64-pc-linux-gnu debian trixie/sid
JobId: 190
Job: BackupCatalog.2026-02-09_23.10.00_23
Backup Level: Full
Client: "bacula-fd"
FileSet: "Catalog" 2025-11-07 11:20:32
Pool: "File" (From Job resource)
Catalog: "MyCatalog" (From Client resource)
Storage: "File1" (From Job resource)
Scheduled time: 09-Feb-2026 23:10:00
Start time: 09-Feb-2026 23:10:02
End time: 09-Feb-2026 23:10:31
Elapsed time: 29 secs
Priority: 11
FD Files Written: 0
SD Files Written: 0
FD Bytes Written: 0 (0 B)
SD Bytes Written: 0 (0 B)
Rate: 0.0 KB/s
Software Compression: None
Comm Line Compression: None
Snapshot/VSS: no
Encryption: no
Accurate: no
Volume name(s):
Volume Session Id: 190
Volume Session Time: 1762539237
Last Volume Bytes: 0 (0 B)
Non-fatal FD errors: 1
SD Errors: 0
FD termination status: Error
SD termination status:
Termination: *** Backup Error ***

This job has been failing since it was created, I just now noticed. Still learning this whole bacula/bacularis toolset so any suggestions? TIA

gani

Hello @michaelc,

This error is the Bacula storage error. The Bacula Director reports that the Storage Daemon is not able to use the device because of some problems with this device. I would propose to check the Storage config on the Bacula Director side and the matching Autochanger and Device config on the Bacula Storage side. Specially worth to check if everything is fine with FileChgr1 (the device exists, the same MediaType, storage path exists ...etc.).

If you want, you can paste here these Bacula configuration resources. This way we could see it and check what is wrong.

Please do not forget that after each configuration file change in the Bacula Storage config, the Storage Daemon needs to be restarted to apply changes.

Good luck.

Best regards,
Marcin Haba (gani)

Ben

I'm having the same problem...

bacula-sd.conf file:

Director {
Name = "you-MS-7845-dir"
Password = "um8JMdINQHvmOwEExbTKZS_3dx0q9qecj"
}
Director {
Name = "you-MS-7845-mon"
Password = "oD_qZv4pdvWywuXDr61w1xKQemqq_CQT8"
Monitor = yes
}
Storage {
Name = "you-MS-7845-sd"
WorkingDirectory = "/var/lib/bacula"
PidDirectory = "/run/bacula"
PluginDirectory = "/usr/lib/bacula"
MaximumConcurrentJobs = 20
}
Device {
Name = "FileChgr1-Dev1"
MediaType = "File1"
ArchiveDevice = "/mnt/qnap-nas/catalog"
RemovableMedia = no
RandomAccess = yes
AutomaticMount = yes
LabelMedia = yes
AlwaysOpen = no
MaximumConcurrentJobs = 5
}
Device {
Name = "FileChgr1-Dev2"
MediaType = "File1"
ArchiveDevice = "/mnt/qnap-nas/catalog"
RemovableMedia = no
RandomAccess = yes
AutomaticMount = yes
LabelMedia = yes
AlwaysOpen = no
MaximumConcurrentJobs = 5
}
Device {
Name = "FileChgr2-Dev1"
MediaType = "File2"
ArchiveDevice = "/mnt/qnap-nas/server"
RemovableMedia = no
RandomAccess = yes
AutomaticMount = yes
LabelMedia = yes
AlwaysOpen = no
MaximumConcurrentJobs = 5
}
Device {
Name = "FileChgr2-Dev2"
MediaType = "File2"
ArchiveDevice = "/mnt/qnap-nas/server"
RemovableMedia = no
RandomAccess = yes
AutomaticMount = yes
LabelMedia = yes
AlwaysOpen = no
MaximumConcurrentJobs = 5
}
Device {
Name = "qnap-nas-001"
Description = ""
MediaType = "File"
DeviceType = "File"
ArchiveDevice = "/mnt/qnap-nas/10700k"
RemovableMedia = no
RandomAccess = yes
AutomaticMount = yes
LabelMedia = yes
Autochanger = yes
ReadOnly = no
MaximumConcurrentJobs = 5
DriveIndex = 0
}
Device {
Name = "qnap-nas-002"
Description = ""
MediaType = "File"
DeviceType = "File"
ArchiveDevice = "/mnt/qnap-nas/10700k"
RemovableMedia = no
RandomAccess = yes
AutomaticMount = yes
LabelMedia = yes
Autochanger = yes
ReadOnly = no
MaximumConcurrentJobs = 5
DriveIndex = 1
}
Device {
Name = "qnap-nas-003"
Description = ""
MediaType = "File"
DeviceType = "File"
ArchiveDevice = "/mnt/qnap-nas/10700k"
RemovableMedia = no
RandomAccess = yes
AutomaticMount = yes
LabelMedia = yes
Autochanger = yes
ReadOnly = no
MaximumConcurrentJobs = 5
DriveIndex = 2
}
Device {
Name = "qnap-nas-004"
Description = ""
MediaType = "File"
DeviceType = "File"
ArchiveDevice = "/mnt/qnap-nas/10700k"
RemovableMedia = no
RandomAccess = yes
AutomaticMount = yes
LabelMedia = yes
Autochanger = yes
ReadOnly = no
MaximumConcurrentJobs = 5
DriveIndex = 3
}
Device {
Name = "qnap-nas-005"
Description = ""
MediaType = "File"
DeviceType = "File"
ArchiveDevice = "/mnt/qnap-nas/10700k"
RemovableMedia = no
RandomAccess = yes
AutomaticMount = yes
LabelMedia = yes
Autochanger = yes
ReadOnly = no
MaximumConcurrentJobs = 5
DriveIndex = 4
}
Device {
Name = "qnap-nas-006"
Description = ""
MediaType = "File"
DeviceType = "File"
ArchiveDevice = "/mnt/qnap-nas/10700k"
RemovableMedia = no
RandomAccess = yes
AutomaticMount = yes
LabelMedia = yes
Autochanger = yes
ReadOnly = yes
MaximumConcurrentJobs = 5
DriveIndex = 5
}
Messages {
Name = "Standard"
Director = you-MS-7845-dir = All
}
Autochanger {
Name = "FileChgr1"
Device = "FileChgr1-Dev1"
Device = "FileChgr1-Dev2"
ChangerDevice = "/dev/null"
ChangerCommand = ""
}
Autochanger {
Name = "FileChgr2"
Device = "FileChgr2-Dev1"
Device = "FileChgr2-Dev2"
ChangerDevice = "/dev/null"
ChangerCommand = ""
}
Autochanger {
Name = "qnap-nas"
Device = "qnap-nas-001"
Device = "qnap-nas-002"
Device = "qnap-nas-003"
Device = "qnap-nas-004"
Device = "qnap-nas-005"
Device = "qnap-nas-006"
ChangerDevice = "/dev/null"
ChangerCommand = "/dev/null"
}

bacula-dir.conf file:

Director {
Name = "you-MS-7845-dir"
Messages = "Daemon"
DirAddress = 127.0.0.1
QueryFile = "/etc/bacula/scripts/query.sql"
WorkingDirectory = "/var/lib/bacula"
PidDirectory = "/run/bacula"
MaximumConcurrentJobs = 20
Password = "qmWjUTneDj2cWZKWcOshzwMnNL3eEWvLT"
}
Client {
Name = "my-10700k-fd"
Address = "192.168.0.49"
Password = "rSsDpJpMfGWw5aA1ryrKrf1wlcnHNdWdBEogUnxaywJL"
Catalog = "MyCatalog"
}
Client {
Name = "you-MS-7845-fd"
Address = "localhost"
FdPort = 9102
Password = "YrtPIzKmj3GJ-g_RuH48nvo1AvAHWlleX"
Catalog = "MyCatalog"
FileRetention = 5184000
JobRetention = 15552000
AutoPrune = yes
}
Job {
Name = "BackupCatalog"
Level = "Full"
Fileset = "Catalog"
Schedule = "WeeklyCycleAfterBackup"
JobDefs = "DefaultJob"
WriteBootstrap = "/var/lib/bacula/%n.bsr"
Runscript {
RunsWhen = "Before"
RunsOnClient = no
Command = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog"
}
Runscript {
RunsWhen = "After"
RunsOnClient = no
Command = "/etc/bacula/scripts/delete_catalog_backup"
}
Priority = 11
}
Job {
Name = "BackupClient1"
JobDefs = "DefaultJob"
}
Job {
Name = "RestoreFiles"
Type = "Restore"
Messages = "Standard"
Storage = "File1"
Pool = "File"
Client = "you-MS-7845-fd"
Fileset = "Full Set"
Where = "/nonexistent/path/to/file/archive/dir/bacula-restores"
}
Storage {
Name = "File1"
SdPort = 9103
Address = "192.168.0.9"
Password = "um8JMdINQHvmOwEExbTKZS_3dx0q9qecj"
Device = "FileChgr1"
MediaType = "File1"
Autochanger = "File1"
MaximumConcurrentJobs = 10
}
Storage {
Name = "File2"
SdPort = 9103
Address = "192.168.0.9"
Password = "um8JMdINQHvmOwEExbTKZS_3dx0q9qecj"
Device = "FileChgr2"
MediaType = "File2"
Autochanger = "File2"
MaximumConcurrentJobs = 10
}
Storage {
Name = "qnap-nas"
SdPort = 9103
Address = "192.168.0.9"
Password = "um8JMdINQHvmOwEExbTKZS_3dx0q9qecj"
Device = "qnap-nas"
MediaType = "File"
Autochanger = "qnap-nas"
MaximumConcurrentJobs = 50
}
Catalog {
Name = "MyCatalog"
Address = "localhost"
Password = "mbononOKFwNm9xUJwuzCL_LrK8H4c1kho"
User = "bacula"
DbName = "bacula"
}
Schedule {
Name = "WeeklyCycle"
Run = Level="Full" 1st sun at 23:05
Run = Level="Differential" 2nd,3rd,4th,5th sun at 23:05
Run = Level="Incremental" mon,tue,wed,thu,fri,sat at 23:05
}
Schedule {
Name = "WeeklyCycleAfterBackup"
Run = Level="Full" at 23:10
}
Fileset {
Name = "Catalog"
Include {
File = "/var/lib/bacula/bacula.sql"
Options {
Signature = "Md5"
}
}
}
Fileset {
Name = "Full Set"
Include {
File = "/usr/sbin"
Options {
Signature = "Md5"
}
}
Exclude {
File = "/var/lib/bacula"
File = "/nonexistent/path/to/file/archive/dir"
File = "/proc"
File = "/tmp"
File = "/sys"
File = "/.journal"
File = "/.fsck"
}
}
Pool {
Name = "Default"
PoolType = "Backup"
MaximumVolumes = 100
MaximumVolumeBytes = 53687091200
VolumeRetention = 31536000
AutoPrune = yes
Recycle = yes
}
Pool {
Name = "File"
PoolType = "Backup"
LabelFormat = "Vol-"
MaximumVolumes = 100
MaximumVolumeBytes = 53687091200
VolumeRetention = 31536000
AutoPrune = yes
Recycle = yes
}
Pool {
Name = "Scratch"
PoolType = "Backup"
}
Messages {
Name = "Daemon"
MailCommand = "/usr/sbin/bsmtp -h localhost -f \"(Bacula) <%r>\" -s \"Bacula daemon message\" %r"
Mail = root = All, !Skipped
Append = /var/log/bacula/bacula.log = All, !Skipped
Console = All, !Skipped
}
Messages {
Name = "Standard"
MailCommand = "/usr/sbin/bsmtp -h localhost -f \"(Bacula) <%r>\" -s \"Bacula: %t %e of %c %l\" %r"
OperatorCommand = "/usr/sbin/bsmtp -h localhost -f \"(Bacula) <%r>\" -s \"Bacula: Intervention needed for %j\" %r"
Mail = root = All, !Skipped
Append = /var/log/bacula/bacula.log = All, !Skipped
Console = All, !Skipped
Operator = root = Mount
Catalog = All
}
Console {
Name = "you-MS-7845-mon"
Password = "MAlQ2nkDWyX4hu9RXXPat95S7Iveyyttg"
CommandAcl = "status"
CommandAcl = ".status"
}
JobDefs {
Name = "DefaultJob"
Type = "Backup"
Level = "Incremental"
Messages = "Standard"
Storage = "File1"
Pool = "File"
Client = "you-MS-7845-fd"
Fileset = "Full Set"
Schedule = "WeeklyCycle"
WriteBootstrap = "/var/lib/bacula/%c.bsr"
SpoolAttributes = yes
Priority = 10
}

Ben

Error report:

you-MS-7845-dir JobId 4: shell command: run BeforeJob "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog"
you-MS-7845-dir JobId 4: Start Backup JobId 4, Job=BackupCatalog.2026-02-26_10.22.02_18
you-MS-7845-dir JobId 4: Connected to Storage "File1" at 192.168.0.9:9103 with TLS
you-MS-7845-dir JobId 4: Storage daemon "File1" didn't accept Device "FileChgr1" because: 3924 Device "FileChgr1" not in SD Device resources or no matching Media Type or is disabled.
you-MS-7845-dir JobId 4: Fatal error: Failed to start job on any of the storages defined!
you-MS-7845-dir JobId 4: Fatal error: No Job status returned from FD.
you-MS-7845-dir JobId 4: Error: Bacula you-MS-7845-dir 13.0.4 (12Feb24):
Build OS: x86_64-pc-linux-gnu ubuntu 24.04
JobId: 4
Job: BackupCatalog.2026-02-26_10.22.02_18
Backup Level: Full
Client: "you-MS-7845-fd"
FileSet: "Catalog" 2026-02-25 22:48:08
Pool: "File" (From Job resource)
Catalog: "MyCatalog" (From Client resource)
Storage: "File1" (From Job resource)
Scheduled time: 26-Feb-2026 10:22:02
Start time: 26-Feb-2026 10:22:04
End time: 26-Feb-2026 10:22:35
Elapsed time: 31 secs
Priority: 11
FD Files Written: 0
SD Files Written: 0
FD Bytes Written: 0 (0 B)
SD Bytes Written: 0 (0 B)
Rate: 0.0 KB/s
Software Compression: None
Comm Line Compression: None
Snapshot/VSS: no
Encryption: no
Accurate: no
Volume name(s):
Volume Session Id: 1
Volume Session Time: 1772129478
Last Volume Bytes: 0 (0 B)
Non-fatal FD errors: 1
SD Errors: 0
FD termination status: Error
SD termination status:
Termination: *** Backup Error ***

gani

Hello @Ben,

Thanks for providing your configuration. It looks quite fine. And what is result of the status storage command executed in Bconsole?

status storage=File1

Best regards,
Marcin Haba (gani)

Ben

status storage=File1
Connecting to Storage daemon File1 at 192.168.0.9:9103

you-MS-7845-sd Version: 13.0.4 (12 February 2024) x86_64-pc-linux-gnu ubuntu 24.04
Daemon started 26-Feb-26 12:15. Jobs: run=0, running=0.
Ulimits: nofile=1024 memlock=unlimited status=nofile
Heap: heap=540,672 smbytes=248,721 max_bytes=370,019 bufs=383 max_bufs=384
Sizes: boffset_t=8 size_t=8 int32_t=4 int64_t=8 mode=0,0 newbsr=0
Crypto: fips=N/A crypto=OpenSSL 3.0.13 30 Jan 2024
Res: ndevices=10 nautochgr=3

Running Jobs:
Director connected using TLS at: 26-Feb-26 12:17

No Jobs running.

Jobs waiting to reserve a drive:

Terminated Jobs:

JobId Level Files Bytes Status Finished Name

1 Full 0 0 Error 25-Feb-26 22:48 BackupCatalog
2 Full 0 0 Error 25-Feb-26 23:05 BackupClient1
3 Full 0 0 Error 25-Feb-26 23:10 BackupCatalog

4 Full 0 0 Error 26-Feb-26 10:22 BackupCatalog

Device status:
Autochanger "FileChgr1" with devices:
FileChgr1-Dev1
FileChgr1-Dev2
Autochanger "FileChgr2" with devices:
FileChgr2-Dev1
FileChgr2-Dev2
Autochanger "qnap-nas" with devices:
"qnap-nas-001" (/mnt/qnap-nas/10700k)
"qnap-nas-002" (/mnt/qnap-nas/10700k)
"qnap-nas-003" (/mnt/qnap-nas/10700k)
"qnap-nas-004" (/mnt/qnap-nas/10700k)
"qnap-nas-005" (/mnt/qnap-nas/10700k)
"qnap-nas-006" (/mnt/qnap-nas/10700k)

Device "FileChgr1-Dev1" is not open or does not exist.

Device "FileChgr1-Dev2" is not open or does not exist.

Device "FileChgr2-Dev1" is not open or does not exist.

Device "FileChgr2-Dev2" is not open or does not exist.

Device File: "qnap-nas-001" (/mnt/qnap-nas/10700k) is not open.
Drive 0 is not loaded.

Available Space=5.733 TB

Device File: "qnap-nas-002" (/mnt/qnap-nas/10700k) is not open.
Drive 1 is not loaded.

Available Space=5.733 TB

Device File: "qnap-nas-003" (/mnt/qnap-nas/10700k) is not open.
Drive 2 is not loaded.

Available Space=5.733 TB

Device File: "qnap-nas-004" (/mnt/qnap-nas/10700k) is not open.
Drive 3 is not loaded.

Available Space=5.733 TB

Device File: "qnap-nas-005" (/mnt/qnap-nas/10700k) is not open.
Drive 4 is not loaded.

Available Space=5.733 TB

Device File: "qnap-nas-006" (/mnt/qnap-nas/10700k) is not open.
Drive 5 is not loaded.

Available Space=5.733 TB

====

Used Volume status:

====

Ben

Network Test:

Connecting to Storage File1 at 192.168.0.9:9103
Connecting to Client you-MS-7845-fd at localhost:9102
Running network test between Client=you-MS-7845-fd and Storage=File1 with 50.00 MB ...
2000 OK FD wrote bytes=50000000 to SD duration=99ms write_speed=506.1 MB/s
2000 OK FD read bytes=50000000 from SD duration=103ms read_speed=486.0 MB/s
2000 OK packets=10 duration=0ms rtt=0.07ms min=0.03ms max=0.15ms

gani

Hello @Ben,

Thanks for provided details.

These messages are the answer to the question why Bacula throws that error during backup:

Device "FileChgr1-Dev1" is not open or does not exist.
Device "FileChgr1-Dev2" is not open or does not exist.
Device "FileChgr2-Dev1" is not open or does not exist.
Device "FileChgr2-Dev2" is not open or does not exist.

This means that Bacula Storage is not able to open these devices and initialize them.

Could you please check these two directories in your file system on the Storage Daemon host?

/mnt/qnap-nas/catalog

/mnt/qnap-nas/server

The most important is to know:

if these paths exist
if they are readable and writeable by the Bacula Storage Daemon user (usually bacula user, and group tape but you can check on the system process list).

If you find that something is wrong with these paths and you fix it, you will need to restart the Storage Daemon.

Please let us know if it helped.

Good luck!

Best regards,
Marcin Haba (gani)

Ben

you@you-MS-7845:~$ cd /mnt/qnap-nas
you@you-MS-7845:/mnt/qnap-nas$ ls
10700k catalog server 'Untitled Document'
you@you-MS-7845:/mnt/qnap-nas$ ls -ld .
drwxr-xr-x 2 bacula tape 0 Feb 25 22:44 .
you@you-MS-7845:/mnt/qnap-nas$ cd server
you@you-MS-7845:/mnt/qnap-nas/server$ ls -ld .
drwxr-xr-x 2 bacula tape 0 Feb 25 22:44 .

The directories can be accessed as far as I can tell...I'm also new to Linux, so can't be trusted 100%.

Ben

gani

Hello @Ben,

OK, thanks.

Could you make sure that all directories in this path can be available for bacula user? You can try these commands executed on root user account:

sudo -u bacula ls -la /mnt
sudo -u bacula ls -la /mnt/qnap-nas
sudo -u bacula ls -la /mnt/qnap-nas/catalog
sudo -u bacula ls -la /mnt/qnap-nas/server

These commands execute ls using bacula user.

If any of these commands throws permission denied error, it may require to adapt permissions for bacula user.

Best regards,
Marcin Haba (gani)

Ben

you@you-MS-7845:~$ sudo -u bacula ls -la /mnt
[sudo] password for you:
total 8
drwxr-xr-x 3 root root 4096 Feb 25 22:24 .
drwxr-xr-x 22 root root 4096 Feb 23 14:31 ..
drwxr-xr-x 2 bacula tape 0 Feb 25 22:44 qnap-nas
you@you-MS-7845:~$ sudo -u bacula ls -la /mnt/qnap-nas
total 8
drwxr-xr-x 2 bacula tape 0 Feb 25 22:44 .
drwxr-xr-x 3 root root 4096 Feb 25 22:24 ..
drwxr-xr-x 2 bacula tape 0 Jan 23 17:12 10700k
drwxr-xr-x 2 bacula tape 0 Feb 25 22:07 catalog
drwxr-xr-x 2 bacula tape 0 Feb 25 22:44 server
-rwxr-xr-x 1 bacula tape 5 Jan 20 01:39 'Untitled Document'
you@you-MS-7845:~$ sudo -u bacula ls -la /mnt/qnap-nas/catalog
total 0
drwxr-xr-x 2 bacula tape 0 Feb 25 22:07 .
drwxr-xr-x 2 bacula tape 0 Feb 25 22:44 ..
you@you-MS-7845:~$ sudo -u bacula ls -la /mnt/qnap-nas/server
total 0
drwxr-xr-x 2 bacula tape 0 Feb 25 22:44 .
drwxr-xr-x 2 bacula tape 0 Feb 25 22:44 ..
you@you-MS-7845:~$

No errors...

Ben

I tried making new folders following the instructions at

https://bacularis.app/doc/bacula-basics/create-bacula-file-storage.html

Restarted, and, I get the same errors. :/

Ben

Has something changed in the repository, I performed the same installation a few weeks ago and didn't experience this problem.

gani

Hello @Ben,

For me it looks to a problem in environment. At least, nothing Bacula related.

I would propose to ask Bacula why it does not want to initialize these devices. To do it, you can stop the storage daemon and run it in debug mode as below.

systemctl stop bacula-sd

bacula-sd -u bacula -g tape -d400 -c /etc/bacula/bacula-sd.conf

Are you seeing any error in the device initialization on standard output? What is the output?

Thanks.

Best regards,
Marcin Haba (gani)

Ben

root@you-MS-7845:~# bacula-sd -u bacula -g tape -d400 -c /etc/bacula/bacula-sd.conf
bacula-sd: lex.c:255-0 Open config file: /etc/bacula/bacula-sd.conf
bacula-sd: address_conf.c:289-0 Initaddr 0.0.0.0:9103
root@you-MS-7845:~# bacula-sd: lex.c:255-0 Open config file: /etc/bacula/bacula-sd.conf
bacula-sd: message.c:439-0 Copy message resource 5b34bbc20198 to 5b34bbc79998
you-MS-7845-sd: jcr.c:130-0 read_last_jobs seek to 192
you-MS-7845-sd: jcr.c:137-0 Read num_items=6
you-MS-7845-sd: sd_plugins.c:202-0 Load sd plugins
you-MS-7845-sd: plugins.c:97-0 load_plugins
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=bpipe-fd.so len=11
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbaccats-postgresql-13.0.4.so len=31
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=bsmtp len=5
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=bfdjson len=7
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbaccats-postgresql.so len=24
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbacsql-13.0.4.so len=19
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbaccats-13.0.4.so len=20
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbaccats.so len=13
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbaccfg.so len=12
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbacsd-13.0.4.so len=18
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbacfind.so len=13
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbac-13.0.4.so len=16
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbacfind-13.0.4.so len=20
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbacsql.so len=12
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=smtp len=4
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbac.so len=9
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbacsd.so len=11
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=bbconsjson len=10
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=bdirjson len=8
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbaccfg-13.0.4.so len=19
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=bsdjson len=7
you-MS-7845-sd: plugins.c:121-0 Failed to find any plugins in /usr/lib/bacula
you-MS-7845-sd: sd_plugins.c:214-0 No plugins loaded
you-MS-7845-sd: sd_plugins.c:285-0 === enter new_plugins ===
you-MS-7845-sd: sd_plugins.c:287-0 No sd plugin list!
you-MS-7845-sd: stored.c:711-0 calling init_dev FileChgr1-Dev1
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=0
you-MS-7845-sd: init_dev.c:147-0 [SE0001] Unable to stat device FileChgr1-Dev1 at /home/you/Documents/bacula-storage: ERR=Permission denied
you-MS-7845-sd: stored.c:713-0 SD init done FileChgr1-Dev1 (0x0)
you-MS-7845-sd: stored.c:715-0 Could not initialize SD device "FileChgr1-Dev1"
you-MS-7845-sd: stored.c:711-0 calling init_dev FileChgr1-Dev2
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=0
you-MS-7845-sd: init_dev.c:147-0 [SE0001] Unable to stat device FileChgr1-Dev2 at /home/you/Documents/bacula-storage: ERR=Permission denied
you-MS-7845-sd: stored.c:713-0 SD init done FileChgr1-Dev2 (0x0)
you-MS-7845-sd: stored.c:715-0 Could not initialize SD device "FileChgr1-Dev2"
you-MS-7845-sd: stored.c:711-0 calling init_dev FileChgr2-Dev1
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=0
you-MS-7845-sd: init_dev.c:147-0 [SE0001] Unable to stat device FileChgr2-Dev1 at /home/you/Documents/bacula-storage: ERR=Permission denied
you-MS-7845-sd: stored.c:713-0 SD init done FileChgr2-Dev1 (0x0)
you-MS-7845-sd: stored.c:715-0 Could not initialize SD device "FileChgr2-Dev1"
you-MS-7845-sd: stored.c:711-0 calling init_dev FileChgr2-Dev2
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=0
you-MS-7845-sd: init_dev.c:147-0 [SE0001] Unable to stat device FileChgr2-Dev2 at /home/you/Documents/bacula-storage: ERR=Permission denied
you-MS-7845-sd: stored.c:713-0 SD init done FileChgr2-Dev2 (0x0)
you-MS-7845-sd: stored.c:715-0 Could not initialize SD device "FileChgr2-Dev2"
you-MS-7845-sd: stored.c:711-0 calling init_dev qnap-nas-001
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=1
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 776c0c00c448
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="qnap-nas-001" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/10700k
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x776c0c00c448 collector=0x5b34bbc88e98
you-MS-7845-sd: stored.c:713-0 SD init done qnap-nas-001 (0x776c0c00c448)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=776c0c00ea30
you-MS-7845-sd: acquire.c:671-0 Attach 0xc00e3d8 to dev "qnap-nas-001" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon* text=Device initialization qnap-nas-001
you-MS-7845-sd: stored.c:758-0 calling first_open_device "qnap-nas-001" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: device.c:304-0 start open_output_device()
you-MS-7845-sd: lock.c:212-0 Enter rLock blked=BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: lock.c:216-0 Lock qnap-nas-001 in rLock BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: device.c:313-0 Device is file, deferring open.
you-MS-7845-sd: lock.c:173-0 rUnlock from device.c:326
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-001 from device.c:326 postcnt=0
you-MS-7845-sd: lock.c:157-0 Lock qnap-nas-001 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-001 from acquire.c:758 postcnt=0
you-MS-7845-sd: stored.c:711-0 calling init_dev qnap-nas-002
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=1
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 776c0c00eb08
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="qnap-nas-002" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/10700k
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x776c0c00eb08 collector=0x5b34bbc88e98
you-MS-7845-sd: stored.c:713-0 SD init done qnap-nas-002 (0x776c0c00eb08)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=776c0c00ea30
you-MS-7845-sd: acquire.c:671-0 Attach 0xc00fcf8 to dev "qnap-nas-002" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Device initialization qnap-nas-002
you-MS-7845-sd: stored.c:758-0 calling first_open_device "qnap-nas-002" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: device.c:304-0 start open_output_device()
you-MS-7845-sd: lock.c:212-0 Enter rLock blked=BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: lock.c:216-0 Lock qnap-nas-002 in rLock BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: device.c:313-0 Device is file, deferring open.
you-MS-7845-sd: lock.c:173-0 rUnlock from device.c:326
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-002 from device.c:326 postcnt=0
you-MS-7845-sd: lock.c:157-0 Lock qnap-nas-002 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-002 from acquire.c:758 postcnt=0
you-MS-7845-sd: stored.c:711-0 calling init_dev qnap-nas-003
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=1
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 776c0c01ffe8
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="qnap-nas-003" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/10700k
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x776c0c01ffe8 collector=0x5b34bbc88e98
you-MS-7845-sd: stored.c:713-0 SD init done qnap-nas-003 (0x776c0c01ffe8)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=776c0c00ea30
you-MS-7845-sd: acquire.c:671-0 Attach 0xc021668 to dev "qnap-nas-003" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Device initialization qnap-nas-003
you-MS-7845-sd: stored.c:758-0 calling first_open_device "qnap-nas-003" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: device.c:304-0 start open_output_device()
you-MS-7845-sd: lock.c:212-0 Enter rLock blked=BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: lock.c:216-0 Lock qnap-nas-003 in rLock BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: device.c:313-0 Device is file, deferring open.
you-MS-7845-sd: lock.c:173-0 rUnlock from device.c:326
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-003 from device.c:326 postcnt=0
you-MS-7845-sd: lock.c:157-0 Lock qnap-nas-003 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-003 from acquire.c:758 postcnt=0
you-MS-7845-sd: stored.c:711-0 calling init_dev qnap-nas-004
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=1
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 776c0c021d08
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="qnap-nas-004" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/10700k
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x776c0c021d08 collector=0x5b34bbc88e98
you-MS-7845-sd: stored.c:713-0 SD init done qnap-nas-004 (0x776c0c021d08)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=776c0c00ea30
you-MS-7845-sd: acquire.c:671-0 Attach 0xc023388 to dev "qnap-nas-004" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Device initialization qnap-nas-004
you-MS-7845-sd: stored.c:758-0 calling first_open_device "qnap-nas-004" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: device.c:304-0 start open_output_device()
you-MS-7845-sd: lock.c:212-0 Enter rLock blked=BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: lock.c:216-0 Lock qnap-nas-004 in rLock BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: device.c:313-0 Device is file, deferring open.
you-MS-7845-sd: lock.c:173-0 rUnlock from device.c:326
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-004 from device.c:326 postcnt=0
you-MS-7845-sd: lock.c:157-0 Lock qnap-nas-004 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-004 from acquire.c:758 postcnt=0
you-MS-7845-sd: stored.c:711-0 calling init_dev qnap-nas-005
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=1
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 776c0c023a28
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="qnap-nas-005" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/10700k
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x776c0c023a28 collector=0x5b34bbc88e98
you-MS-7845-sd: stored.c:713-0 SD init done qnap-nas-005 (0x776c0c023a28)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=776c0c00ea30
you-MS-7845-sd: acquire.c:671-0 Attach 0xc0250a8 to dev "qnap-nas-005" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Device initialization qnap-nas-005
you-MS-7845-sd: stored.c:758-0 calling first_open_device "qnap-nas-005" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: device.c:304-0 start open_output_device()
you-MS-7845-sd: lock.c:212-0 Enter rLock blked=BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: lock.c:216-0 Lock qnap-nas-005 in rLock BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: device.c:313-0 Device is file, deferring open.
you-MS-7845-sd: lock.c:173-0 rUnlock from device.c:326
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-005 from device.c:326 postcnt=0
you-MS-7845-sd: lock.c:157-0 Lock qnap-nas-005 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-005 from acquire.c:758 postcnt=0
you-MS-7845-sd: stored.c:711-0 calling init_dev qnap-nas-006
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=1
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 776c0c025748
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="qnap-nas-006" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/10700k
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x776c0c025748 collector=0x5b34bbc88e98
you-MS-7845-sd: stored.c:713-0 SD init done qnap-nas-006 (0x776c0c025748)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=776c0c00ea30
you-MS-7845-sd: acquire.c:671-0 Attach 0xc026dc8 to dev "qnap-nas-006" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Device initialization qnap-nas-006
you-MS-7845-sd: stored.c:758-0 calling first_open_device "qnap-nas-006" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: device.c:304-0 start open_output_device()
you-MS-7845-sd: lock.c:212-0 Enter rLock blked=BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: lock.c:216-0 Lock qnap-nas-006 in rLock BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: device.c:313-0 Device is file, deferring open.
you-MS-7845-sd: lock.c:173-0 rUnlock from device.c:326
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-006 from device.c:326 postcnt=0
you-MS-7845-sd: lock.c:157-0 Lock qnap-nas-006 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-006 from acquire.c:758 postcnt=0
you-MS-7845-sd: events.c:48-0 Events: code=SD0001 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Storage startup 13.0.4 (12Feb24)
you-MS-7845-sd: bnet_server.c:90-0 Addresses 0.0.0.0:9103
root@you-MS-7845:~#

Ben

After switching back to qnap-nas path...

root@you-MS-7845:~# systemctl stop bacula-sd
root@you-MS-7845:~# bacula-sd -u bacula -g tape -d400 -c /etc/bacula/bacula-sd.conf
bacula-sd: lex.c:255-0 Open config file: /etc/bacula/bacula-sd.conf
bacula-sd: address_conf.c:289-0 Initaddr 0.0.0.0:9103
bacula-sd: lex.c:255-0 Open config file: /etc/bacula/bacula-sd.conf
root@you-MS-7845:~# bacula-sd: message.c:439-0 Copy message resource 5fe0891611b8 to 5fe0891ba958
you-MS-7845-sd: jcr.c:130-0 read_last_jobs seek to 192
you-MS-7845-sd: jcr.c:137-0 Read num_items=6
you-MS-7845-sd: sd_plugins.c:202-0 Load sd plugins
you-MS-7845-sd: plugins.c:97-0 load_plugins
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=bpipe-fd.so len=11
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbaccats-postgresql-13.0.4.so len=31
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=bsmtp len=5
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=bfdjson len=7
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbaccats-postgresql.so len=24
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbacsql-13.0.4.so len=19
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbaccats-13.0.4.so len=20
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbaccats.so len=13
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbaccfg.so len=12
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbacsd-13.0.4.so len=18
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbacfind.so len=13
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbac-13.0.4.so len=16
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbacfind-13.0.4.so len=20
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbacsql.so len=12
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=smtp len=4
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbac.so len=9
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbacsd.so len=11
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=bbconsjson len=10
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=bdirjson len=8
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=libbaccfg-13.0.4.so len=19
you-MS-7845-sd: plugins.c:133-0 Rejected plugin: want=-sd.so got name=bsdjson len=7
you-MS-7845-sd: plugins.c:121-0 Failed to find any plugins in /usr/lib/bacula
you-MS-7845-sd: sd_plugins.c:214-0 No plugins loaded
you-MS-7845-sd: sd_plugins.c:285-0 === enter new_plugins ===
you-MS-7845-sd: sd_plugins.c:287-0 No sd plugin list!
you-MS-7845-sd: stored.c:711-0 calling init_dev FileChgr1-Dev1
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=0
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 78214800bb48
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="FileChgr1-Dev1" (/mnt/qnap-nas/catalog)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/catalog
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x78214800bb48 collector=0x5fe0891c9e58
you-MS-7845-sd: stored.c:713-0 SD init done FileChgr1-Dev1 (0x78214800bb48)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=78214800d9e0
you-MS-7845-sd: acquire.c:671-0 Attach 0x4800d388 to dev "FileChgr1-Dev1" (/mnt/qnap-nas/catalog)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon* text=Device initialization FileChgr1-Dev1
you-MS-7845-sd: lock.c:157-0 Lock FileChgr1-Dev1 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock FileChgr1-Dev1 from acquire.c:758 postcnt=0
you-MS-7845-sd: stored.c:711-0 calling init_dev FileChgr1-Dev2
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=0
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 78214800dab8
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="FileChgr1-Dev2" (/mnt/qnap-nas/catalog)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/catalog
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x78214800dab8 collector=0x5fe0891c9e58
you-MS-7845-sd: stored.c:713-0 SD init done FileChgr1-Dev2 (0x78214800dab8)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=78214800d9e0
you-MS-7845-sd: acquire.c:671-0 Attach 0x4800f138 to dev "FileChgr1-Dev2" (/mnt/qnap-nas/catalog)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Device initialization FileChgr1-Dev2
you-MS-7845-sd: lock.c:157-0 Lock FileChgr1-Dev2 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock FileChgr1-Dev2 from acquire.c:758 postcnt=0
you-MS-7845-sd: stored.c:711-0 calling init_dev FileChgr2-Dev1
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=0
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 78214801f428
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="FileChgr2-Dev1" (/mnt/qnap-nas/server)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/server
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x78214801f428 collector=0x5fe0891c9e58
you-MS-7845-sd: stored.c:713-0 SD init done FileChgr2-Dev1 (0x78214801f428)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=78214800d9e0
you-MS-7845-sd: acquire.c:671-0 Attach 0x48020aa8 to dev "FileChgr2-Dev1" (/mnt/qnap-nas/server)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Device initialization FileChgr2-Dev1
you-MS-7845-sd: lock.c:157-0 Lock FileChgr2-Dev1 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock FileChgr2-Dev1 from acquire.c:758 postcnt=0
you-MS-7845-sd: stored.c:711-0 calling init_dev FileChgr2-Dev2
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=0
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 782148021148
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="FileChgr2-Dev2" (/mnt/qnap-nas/server)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/server
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x782148021148 collector=0x5fe0891c9e58
you-MS-7845-sd: stored.c:713-0 SD init done FileChgr2-Dev2 (0x782148021148)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=78214800d9e0
you-MS-7845-sd: acquire.c:671-0 Attach 0x480227c8 to dev "FileChgr2-Dev2" (/mnt/qnap-nas/server)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Device initialization FileChgr2-Dev2
you-MS-7845-sd: lock.c:157-0 Lock FileChgr2-Dev2 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock FileChgr2-Dev2 from acquire.c:758 postcnt=0
you-MS-7845-sd: stored.c:711-0 calling init_dev qnap-nas-001
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=1
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 782148022e68
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="qnap-nas-001" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/10700k
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x782148022e68 collector=0x5fe0891c9e58
you-MS-7845-sd: stored.c:713-0 SD init done qnap-nas-001 (0x782148022e68)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=78214800d9e0
you-MS-7845-sd: acquire.c:671-0 Attach 0x480244e8 to dev "qnap-nas-001" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Device initialization qnap-nas-001
you-MS-7845-sd: stored.c:758-0 calling first_open_device "qnap-nas-001" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: device.c:304-0 start open_output_device()
you-MS-7845-sd: lock.c:212-0 Enter rLock blked=BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: lock.c:216-0 Lock qnap-nas-001 in rLock BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: device.c:313-0 Device is file, deferring open.
you-MS-7845-sd: lock.c:173-0 rUnlock from device.c:326
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-001 from device.c:326 postcnt=0
you-MS-7845-sd: lock.c:157-0 Lock qnap-nas-001 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-001 from acquire.c:758 postcnt=0
you-MS-7845-sd: stored.c:711-0 calling init_dev qnap-nas-002
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=1
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 782148024b88
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="qnap-nas-002" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/10700k
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x782148024b88 collector=0x5fe0891c9e58
you-MS-7845-sd: stored.c:713-0 SD init done qnap-nas-002 (0x782148024b88)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=78214800d9e0
you-MS-7845-sd: acquire.c:671-0 Attach 0x48026208 to dev "qnap-nas-002" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Device initialization qnap-nas-002
you-MS-7845-sd: stored.c:758-0 calling first_open_device "qnap-nas-002" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: device.c:304-0 start open_output_device()
you-MS-7845-sd: lock.c:212-0 Enter rLock blked=BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: lock.c:216-0 Lock qnap-nas-002 in rLock BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: device.c:313-0 Device is file, deferring open.
you-MS-7845-sd: lock.c:173-0 rUnlock from device.c:326
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-002 from device.c:326 postcnt=0
you-MS-7845-sd: lock.c:157-0 Lock qnap-nas-002 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-002 from acquire.c:758 postcnt=0
you-MS-7845-sd: stored.c:711-0 calling init_dev qnap-nas-003
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=1
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 7821480268a8
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="qnap-nas-003" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/10700k
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x7821480268a8 collector=0x5fe0891c9e58
you-MS-7845-sd: stored.c:713-0 SD init done qnap-nas-003 (0x7821480268a8)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=78214800d9e0
you-MS-7845-sd: acquire.c:671-0 Attach 0x48027f28 to dev "qnap-nas-003" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Device initialization qnap-nas-003
you-MS-7845-sd: stored.c:758-0 calling first_open_device "qnap-nas-003" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: device.c:304-0 start open_output_device()
you-MS-7845-sd: lock.c:212-0 Enter rLock blked=BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: lock.c:216-0 Lock qnap-nas-003 in rLock BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: device.c:313-0 Device is file, deferring open.
you-MS-7845-sd: lock.c:173-0 rUnlock from device.c:326
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-003 from device.c:326 postcnt=0
you-MS-7845-sd: lock.c:157-0 Lock qnap-nas-003 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-003 from acquire.c:758 postcnt=0
you-MS-7845-sd: stored.c:711-0 calling init_dev qnap-nas-004
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=1
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 7821480285c8
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="qnap-nas-004" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/10700k
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x7821480285c8 collector=0x5fe0891c9e58
you-MS-7845-sd: stored.c:713-0 SD init done qnap-nas-004 (0x7821480285c8)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=78214800d9e0
you-MS-7845-sd: acquire.c:671-0 Attach 0x48029c48 to dev "qnap-nas-004" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Device initialization qnap-nas-004
you-MS-7845-sd: stored.c:758-0 calling first_open_device "qnap-nas-004" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: device.c:304-0 start open_output_device()
you-MS-7845-sd: lock.c:212-0 Enter rLock blked=BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: lock.c:216-0 Lock qnap-nas-004 in rLock BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: device.c:313-0 Device is file, deferring open.
you-MS-7845-sd: lock.c:173-0 rUnlock from device.c:326
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-004 from device.c:326 postcnt=0
you-MS-7845-sd: lock.c:157-0 Lock qnap-nas-004 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-004 from acquire.c:758 postcnt=0
you-MS-7845-sd: stored.c:711-0 calling init_dev qnap-nas-005
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=1
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 78214802a2e8
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="qnap-nas-005" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/10700k
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x78214802a2e8 collector=0x5fe0891c9e58
you-MS-7845-sd: stored.c:713-0 SD init done qnap-nas-005 (0x78214802a2e8)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=78214800d9e0
you-MS-7845-sd: acquire.c:671-0 Attach 0x4802b968 to dev "qnap-nas-005" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Device initialization qnap-nas-005
you-MS-7845-sd: stored.c:758-0 calling first_open_device "qnap-nas-005" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: device.c:304-0 start open_output_device()
you-MS-7845-sd: lock.c:212-0 Enter rLock blked=BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: lock.c:216-0 Lock qnap-nas-005 in rLock BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: device.c:313-0 Device is file, deferring open.
you-MS-7845-sd: lock.c:173-0 rUnlock from device.c:326
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-005 from device.c:326 postcnt=0
you-MS-7845-sd: lock.c:157-0 Lock qnap-nas-005 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-005 from acquire.c:758 postcnt=0
you-MS-7845-sd: stored.c:711-0 calling init_dev qnap-nas-006
you-MS-7845-sd: sd_plugins.c:158-0 No b_plugin_list: generate_global_plugin_event ignored.
you-MS-7845-sd: init_dev.c:141-0 init_dev dev_type=1
you-MS-7845-sd: init_dev.c:177-0 Num drivers=15
you-MS-7845-sd: init_dev.c:185-0 loadable=0 type=1 loaded=1 name=file handle=0
you-MS-7845-sd: init_dev.c:235-0 init_dev allocated: 78214802c008
you-MS-7845-sd: init_dev.c:296-0 Allocate dev="qnap-nas-006" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: init_dev.c:437-0 init_dev: tape=0 dev_name=/mnt/qnap-nas/10700k
you-MS-7845-sd: dev.c:1143-0 DEVICE::register_metrics called. 0x78214802c008 collector=0x5fe0891c9e58
you-MS-7845-sd: stored.c:713-0 SD init done qnap-nas-006 (0x78214802c008)
you-MS-7845-sd: block_util.c:329-0 empty_block: adata=0 len=64512 set binbuf=24
you-MS-7845-sd: block_util.c:174-0 New block adata=0 len=64512 block=78214800d9e0
you-MS-7845-sd: acquire.c:671-0 Attach 0x4800fe58 to dev "qnap-nas-006" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: events.c:48-0 Events: code=SD0002 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Device initialization qnap-nas-006
you-MS-7845-sd: stored.c:758-0 calling first_open_device "qnap-nas-006" (/mnt/qnap-nas/10700k)
you-MS-7845-sd: sd_plugins.c:104-0 No b_plugin_list: generate_plugin_event ignored.
you-MS-7845-sd: device.c:304-0 start open_output_device()
you-MS-7845-sd: lock.c:212-0 Enter rLock blked=BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: lock.c:216-0 Lock qnap-nas-006 in rLock BST_NOT_BLOCKED from device.c:309
you-MS-7845-sd: device.c:313-0 Device is file, deferring open.
you-MS-7845-sd: lock.c:173-0 rUnlock from device.c:326
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-006 from device.c:326 postcnt=0
you-MS-7845-sd: lock.c:157-0 Lock qnap-nas-006 from acquire.c:737 precnt=0
you-MS-7845-sd: lock.c:167-0 Unlock qnap-nas-006 from acquire.c:758 postcnt=0
you-MS-7845-sd: events.c:48-0 Events: code=SD0001 daemon=you-MS-7845-sd ref=0x238f type=daemon source=Daemon text=Storage startup 13.0.4 (12Feb24)
you-MS-7845-sd: bnet_server.c:90-0 Addresses 0.0.0.0:9103
root@you-MS-7845:~#

Ben

Okay, here's something strange, in debug mode, the job completed successfully, so I tried it again in normal mode after rebooting, and it failed, again.

gani

Hello @Ben,

If devices on bacula-sd running with debug in command line work well and with normal running without debug not, this maybe can mean that there is an systemd option that can block or reject access to your devices. You can see with what options it is running here:

cat /usr/lib/systemd/system/bacula-sd.service

and you can try to change some of them to diagnose what is the problem. Once we know the problem, we will know how to solve it.

Best regards,
Marcin Haba (gani)